Customer Preference Items

CUSTOMER PREFERENCE ITEMS

NOTE: If using the WDS or equivalent, select Module Configuration and Programming, then follow the screen prompts.

NOTE: Make sure module is listed as supporting customer preference items and supports the specific item to be configured; refer to MODULE CONFIGURATION.

1. Select Service Bay Functions on the WDS or equivalent Tester.
2. Select the module that contains the customer preference item to be programmed. Refer to MODULE CONFIGURATION
3. Select Customer Preference Items on the WDS or equivalent Tester.
4. Select Module Option Content.
5. Select the item to be enabled or disabled.
6. Enable or disable the item as necessary to reflect the customer preference.