Hazard Warning Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
Remove the center panel module. (See CENTER PANEL MODULE REMOVAL/INSTALLATION .)
Verify that the continuity between the hazard switch terminals is as indicated in the table.
- If not as indicated in the table, replace the center panel.
Fig 1: Terminal And Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Checking Continuity Between Hazard Switch Terminals
Courtesy of MAZDA MOTORS CORP.