LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> Tribute i, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor - 2.3L >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Disconnect the battery. See BATTERY DISCONNECT .
  2. Disconnect the CMP electrical connector.
  3. Remove the CMP bolt.
  4. Remove the CMP sensor.
  5. Remove the O-ring.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals