LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 5 Sport, 2.3 L, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Neutral Switch Inspection >> Continuity Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

  1. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
  2. Verify that the continuity between neutral switch terminals A and B is as indicated in the table.
    • If it can be verified, perform the "Circuit Open/Short Inspection".
    • If it cannot be verified, replace the neutral switch.
      Fig 1: Checking Continuity Between Neutral Switch Terminals A And B
      G04316080Courtesy of MAZDA MOTORS CORP.
      TERMINALS CONTINUITY CHART

      Measured condition Continuity
      Rod pushed Continuity detected
      Except above No continuity
scientia non olet · About LEMON Manuals