July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC P0016: Notes

DTC P0016 [L3] CHART

DTC P0016

CKP-CMP correlation

DETECTION CONDITION

The PCM monitors the input pulses from the CKP sensor and CMP sensor. If the input pulse pick-up timing do not match each other, the PCM determines that the camshaft position does not coincide with the crankshaft position.

Diagnostic support note

This is a continuous monitor (CCM).
MIL illuminates if the PCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the PCM.
PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
FREEZE FRAME DATA is available.
The DTC is stored in the PCM memory.

POSSIBLE CAUSE

Poor connection of connector
CMP sensor malfunction
CKP sensor malfunction
Damaged or scratched CMP sensor pulse wheel
Damaged or scratched CKP sensor pulse wheel
Foreign material on CMP sensor
Foreign material on CMP sensor
Improper valve timing