LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 5 Touring, 2.3 L >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position (CKP) Sensor Removal/Installation: Removal

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] ).
  2. Disconnect the negative battery cable.
  3. Remove the plug hole cover.
  4. Perform the following procedure for easier access.
    1. Remove the front tire (RH).
    2. Remove the splash shield.
  5. Disconnect the CKP sensor connector.
  6. Remove the installation bolt and remove the CKP sensor.
scientia non olet · About LEMON Manuals