LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Rermoval and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rermoval and Installation

PCM REMOVAL/INSTALLATION

NOTE: For PCM replacement, setup the WDS and perform the PCM configuration.

1. Disconnect the negative battery cable.




2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals