Seat Occupant Classification Module - Air Bag: Service and Repair

SEAT WEIGHT SENSOR CONTROL MODULE REMOVAL/INSTALLATION

CAUTION: When the seat weight sensor control module is replaced with a new one, perform the seat weight sensor calibration using the WDS or equivalent. Programming and Relearning

Removal
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the front passenger's seat.




4. Remove the seat weight sensor control module connector.
5. Remove the seat weight sensor control module installation rivets using a drill.
6. Remove the seat weight sensor control module.

Installation
1. Remove the seat adjuster.




2. Set the rivet to the rivet, and then secure the seat weight sensor control module to the seat adjuster with the rivets.
3. Install in the reverse order of removal.