DTC P2502: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P2502 [AJ] DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2502 |
Generator terminal B circuit open |
| DETECTION CONDITION |
- The PCM determines that the generator output voltage is 17 V or above
, or the battery voltage is 11 V or below
when the engine is running.
Diagnostic support note
- This is a continuous monitor (Other).
- The MIL does not illuminate.
- PENDING CODE is available if the PCM detects the above malfunction condition.
- FREEZE FRAME DATA is not available.
- DTC is stored in PCM memory.
|
| POSSIBLE CAUSE |
- Open circuit between generator terminal B and the battery positive terminal
- Battery malfunction
- PCM malfunction
|