LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (On-Board Diagnostic [Engine Control System L3)) >> After Repair Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

After Repair Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect WDS or equivalent.
  2. Cycle the ignition switch from OFF to ON.
  3. Record DTC if retrieved.
  4. Clear all diagnostic data by WDS or equivalent.
    Fig 1: Locating DLC-2 Connector
    G04324072Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals