Diagnostic Monitoring Test Results

The purpose of this test mode is to confirm the result of the OBD-II monitor diagnostic test results. The result values stored when a particular monitor is completed are displayed. If the monitor is not completed, the initial value is displayed.

DIAGNOSTIC MONITORING TEST RESULTS CHART (AJ)

Test ID

Description

Related system

10:01:01

Rich to lean sensor threshold voltage (RF)

HO2S

10:01:02

Lean to rich sensor threshold voltage (RF)

10:01:03

Low sensor voltage for switching time calculation (RF)

10:01:04

High sensor voltage for switching time calculation (RF)

10:01:05

Rich to lean sensor switching time (RF)

10:01:06

Lean to rich sensor switching time (RF)

10:01:0A

Sensor period (RF)

10:02:03

Low sensor voltage for switching time calculation (RR)

10:02:04

High sensor voltage for switching time calculation (RR)

10:02:05

Rich to lean sensor switching time (RR)

10:05:01

Rich to lean sensor threshold voltage (LF)

10:05:02

Lean to rich sensor threshold voltage (LF)

10:05:03

Low sensor voltage for switching time calculation (LF)

10:05:04

High sensor voltage for switching time calculation (LF)

10:05:05

Rich to lean sensor switching time (LF)

10:05:06

Lean to rich sensor switching time (LF)

10:05:0A

Sensor period (LF)

10:06:03

Low sensor voltage for switching time calculation (LR)

10:06:04

High sensor voltage for switching time calculation (LR)

10:06:05

Rich to lean sensor switching time (LR)

10:21:80

Front and rear HO2S switching time ratio (RH)

TWC

10:22:80

Front and rear HO2S switching time ratio (LH)

10:31:83

EGR flow test

EGR

10:3A:80

Large leak check

EVAP

10:3B:80

Small leak check

10:3C:80⁽¹⁾

Very small leak check

10:3D:80

Purge flow monitor

10:A2:0B

EWMA misfire counts for last 10 driving cycles

Misfire

10:A2:0C