LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Security System And Locks System) >> Door Lock Control Module Inspection >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Door Lock Control Module Inspection: Notes

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower panel.
  2. Measure the voltage at the door lock control module terminals as indicated below.
  3. Disconnect the door lock control module connector before inspecting for continuity at terminals M and N.
    • If not as specified, inspect the parts listed under "Action".
    • If the parts and wiring harnesses are okay but the system still does not work properly, replace the door lock control module.
scientia non olet · About LEMON Manuals