LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> B4000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Removal / Installation - 4.0L >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

Fig 1: Removing Camshaft Position (CMP) Sensor
G04308372Courtesy of MAZDA MOTORS CORP.
  1. Remove the camshaft position (CMP) sensor.
    1. Disconnect the electrical connector.
    2. Remove the bolt.
    3. Remove the sensor.
    Fig 2: Installing Camshaft Position Sensor
    G04308373Courtesy of MAZDA MOTORS CORP.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals