LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Pcm Removal/Installation >> PCM Panel Removal Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

PCM Panel Removal Note

  1. Before removing the PCM panel, pull the PCM connector harness stay fastener out from the PCM panel.
  2. Remove the upper right side of the PCM panel installation nut located at the back of the blower unit as shown.
  3. Remove the lower side of the PCM panel installation nuts located at the bottom of the cabin carpet.
    Fig 1: Identifying Lower Side Of PCM Panel Nuts
    G04328305Courtesy of MAZDA MOTORS CORP.
  4. Remove four installation nuts, then pull the PCM panel down to remove from installation place.
    Fig 2: Pulling PCM Panel Down
    G04328306Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals