Fuel Injector Removal/Installation: Notes

Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE .)
Disconnect the negative battery cable.
Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
Disconnect the fuel injector connectors and remove the harness from the fuel distributor.
Remove in the order indicated in Fig 1.
CAUTION:
- Disconnecting/connecting the quick release connector without cleaning it may possibly cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is free of foreign material.
Install in the reverse order of removal.
Complete the "After Repair Procedure". (See AFTER REPAIR PROCEDURE .)

Fig 1: Removing/Installing Fuel Injector With Torque Specifications