October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Using the SST (WDS or Equivalent)

PCM Inspection Using the SST (WDS or equivalent)

NOTE: PIDs for the following parts are not available on this model. Go to the appropriate part inspection.
- CMP sensor.
- Main relay.

1. Connect the WDS or equivalent to the DLC-2. (See ON-BOARD DIAGNOSTIC TEST [AJ].)
2. Turn the ignition switch to ON.
3. Measure the value.
- If the value is not within the specification, follow the instructions in Action column.