LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MX-5 Miata Club Spec >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Flasher Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Flasher Control Module Removal/Installation

  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Disconnect the connector.
  4. Remove the screw and then remove the flasher control module.
  5. Install in the reverse order of removal.
    Fig 1: Removing Flasher Control Module
    G04323726Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals