Brake Rotor/Disc

Front disc plate runout limit 0.05 mm (0.002 inch)
Minimum front disc plate thickness 23 mm (0.91 inch)
Minimum front disc plate thickness after machining 23.8 mm (0.94 inch)

Rear disc plate runout limit 0.05 mm (0.002 inch)
Minimum rear disc plate thickness
L3, AJ 8 mm (0.31 inch)
L3 WITH TC 9 mm (0.35 inch)
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle
L3, AJ 8.8 mm (0.35 inch)
L3 WITH TC 9.8 mm (0.39 inch)