April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 10 (Manual Transaxle): Synchronizers: Assembly

WARNING: This page is about a different variant/trim than selected.

NOTE:

Align the index marks during assembly.

Assemble the synchronizer.
1. Position the synchronizer hub and sleeve together.
2. Install the synchronizer hub inserts.
  
  Fig 1: Installing Synchronizer Springs
  Courtesy of MAZDA MOTORS CORP.
  CAUTION:
  - When assembling the synchronizer springs make sure the springs are offset from one another.
Install the synchronizer springs.