After Repair Procedure

Connect the M-MDS to the DLC-2

Fig 1: Locating DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
After the vehicle is identified, from the initial screen select the following items:
- When using the IDS (laptop PC)
  1. Select the "Toolbox" tab.
  2. Select "Self Test".
  3. Select "Modules".
  4. Select "PCM".
  5. Select "Retrieve CMDTCs".
- When using the PDS (Pocket PC)
  1. Select "Module Tests".
  2. Select "PCM".
  3. Select "Self Test".
  4. Select "Retrieve CMDTCs".
Verify the DTC according to the directions on the screen.
Press the clear button on the DTC screen to clear the DTC.
Verify that no DTCs are displayed.
Turn the ignition switch OFF.