April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0111: Notes

DTC P0111 DETECTION CONDITION AND POSSIBLE CAUSES

DTC P0111

IAT circuit range/performance problem

DETECTION CONDITION

If intake air temperature is higher than engine coolant temperature by 18 °C {32.4 °F} for 1.2 s with ignition switch on^* , the PCM determines that there is a intake air temperature sensor circuit range/performance problem.
^* : Ignition switch on when 6 h or more has passed since the previous ignition switch off

Diagnostic support note

This is a continuous monitor (CCM).
MIL illuminates if the PCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the PCM.
PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
FREEZE FRAME DATA is available.
DTC is stored in PCM memory.

POSSIBLE CAUSE

IAT sensor malfunction
Poor connection at MAF/IAT sensor or PCM connector
PCM malfunction