LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3) >> DTC P2126 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P2126: Notes

DTC P2126 DETECTION CONDITION AND POSSIBLE CAUSES

DTC P2126 APP sensor No. 2 range/performance problem
DETECTION CONDITION 
  • The PCM monitors the APP sensor duty signal. If the input signal (duty signal) is too high or too low than the set value, or the input signal intervals are too short or too long, the PCM determines that the APP sensor No. 2 has a malfunction.

    • Diagnostic support note 

  • This is a continuous monitor (CCM).
  • MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
  • FREEZE FRAME DATA is available.
  • The DTC is stored in the PCM memory.
POSSIBLE CAUSE 
  • APP sensor No. 2 malfunction
  • PCM malfunction
scientia non olet · About LEMON Manuals