On-Board System Readiness Tests Access Procedure

Connect the M-MDS or equivalent to the DLC-2.

Fig 1: Identifying Data Link Connector (DLC-2)
Courtesy of MAZDA MOTORS CORP.
After the vehicle is identified, from the initial screen select the following items:
- When using the IDS (laptop PC)
  1. Select the "Tool Box" tab
  2. Select "Powertrain"
  3. Select "OBD Test Modes"
  4. Select "Mode 1 Powertrain Data"
- When using the PDS (Pocket PC)
  1. Select "OBDII Test Modes"
  2. Select "Mode 1 Powertrain Data"
Then, select "Retrieve "***SUP" and "***EVAL" PIDs in the PID selection screen.
Monitor those PIDs and check if system monitor is completed.