Pending Trouble Code Access Procedure

Connect the M-MDS or equivalent to the DLC-2.

Fig 1: Identifying Data Link Connector (DLC-2)
Courtesy of MAZDA MOTORS CORP.
After the vehicle is identified, from the initial screen select the following items:
- When using the IDS (laptop PC)
  1. Select the "Tool Box" tab
  2. Select "Self test"
  3. Select "Modules"
  4. Select "PCM"
- When using the PDS (Pocket PC)
  1. Select "Modules tests"
  2. Select "PCM"
  3. Select "Self test"
Then, select "Retrieve CMDTCs" and perform the procedures according to the directions on the screen.
Retrieve the pending trouble codes according to the directions on the screen.