LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 666 (Security System And Locks System) >> Liftgate Outer Handle Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Outer Handle Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  2. Remove the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  4. Remove the nuts.
    Fig 1: Liftgate Outer Handle Nut & Torque Specification
    G04956840Courtesy of MAZDA MOTORS CORP.
  5. Detach the cable.
  6. Install in the reverse order of removal.
    Fig 2: Detaching Liftgate Cable
    G04956841Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals