LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (L3)) >> Camshaft Position (CMP) Sensor Inspection >> Visual Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Visual Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION ).
  3. Verify that there are no metal shavings on the sensor.
    • If the monitor item condition/specification (reference) is not within the specification even though there is no malfunction, carry out the "Circuit Open/Short Inspection".
scientia non olet · About LEMON Manuals