July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Electrical System: Connectors: Inspection

When a tester is used to inspect for continuity or measuring voltage, insert the tester probe from the wiring harness side.
Inspect the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.

Fig 1: View Of Proper And Improper Terminal Probe Methods

G04330059

CAUTION:

To prevent damage to the terminal, wrap a thin wire around the tester probe before inserting into terminal.

Fig 2: View Of Proper And Improper Terminal Probe Methods

G04330599