DTC P0602: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P0602 DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P0602 |
PCM programming error |
| DETECTION CONDITION |
- No configuration data in PCM
NOTE:
- If the "PCM CONFIGURATION" is successful, the PCM stores DTC P0602 and illuminates the MIL (System is normal). Clear DTC P0602 using the WDS or equivalent after the "PCM CONFIGURATION".
- MIL turns off after three drive cycles with no failure (DTCs remain in PCM).
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if the PCM detects the above malfunction condition during first drive cycle.
- FREEZE FRAME DATA is available.
- DTCs are stored in PCM memory.
|
| POSSIBLE CAUSE |
- Configuration has not been completed.
- PCM malfunction
|