LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting - Engine (3 Of 4) >> Charging System Component Tests >> Generator On-Vehicle Tests-No-Load Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Generator On-Vehicle Tests-No-Load Test

  1. Switch the Battery Tester to the voltmeter function.
  2. Connect the voltmeter positive lead to the generator B+ terminal 0117-03 circuit (R) and the negative lead to ground.
  3. Turn all electrical accessories off.
  4. With the engine running at 2000 rpm, check the generator output voltage. The voltage should be between 13.0 and 15.0 volts. If not, See SYMPTOM TROUBLESHOOTING CHART - CHARGING SYSTEM .
scientia non olet · About LEMON Manuals