LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Buckle Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Buckle Removal/Installation

  1. Turn the ignition switch to the LOCK position.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION ).
  4. Detach the tab as shown in the figure and remove the connector from the front seat connector.
    Fig 1: View Of Connector And Front Seat Connector
    G04860851Courtesy of MAZDA MOTORS CORP.
  5. Remove in the order indicated in the table.
    Fig 2: Bolt And Front Buckle With Torque Specifications
    G04860852Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals