LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Lever Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Selector Lever Component Inspection

  1. Disconnect the negative battery cable.
  2. Remove the center console.
  3. Remove the dashboard completely. (See DASHBOARD REMOVAL/INSTALLATION ).
  4. Disconnect the selector lever component connector.
  5. Inspect for continuity at the selector lever component.
    • If there is any malfunction, adjust the selector cable. (See SELECTOR CABLE ADJUSTMENT .)
      Fig 1: Continuity Reference Chart
      G04860455Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Selector Lever Component Connector
      G04860456Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals