Seat Occupant Classification Module - Air Bag: Service and Repair

SEAT WEIGHT SENSOR CONTROL MODULE REMOVAL/INSTALLATION

CAUTION: When the seat weight sensor control module is replaced with a new one, calibrate the seat weight sensor using the M-MDS. (See SEAT WEIGHT SENSOR CALIBRATION.)

1. Turn the ignition switch to the LOCK position.
2. Remove the battery cover.
3. Disconnect the negative battery cable and wait for 1 min or more.
4. Remove the front passenger's seat.
5. Remove in the order indicated in the table.






6. Install in the reverse order of removal.