LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2008 >> 6 V6-3.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Timing Components >> System Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

System Specifications

Crankshaft Pulley
Tighten the new crankshaft pulley lock bolt in four steps.
(1) Tighten to 120 Nm (12.2 kgf.m, 88.5 ft. lbf)
(2) Loosen 360° (one full turn) in reverse order.
(3) Tighten to 47 - 53 Nm (4.8 - 5.4 kgf.m, 35 - 39 ft. lbf)
(4) Tighten 85° - 95°

Engine Front Cover





Install the remaining bolts and studs, and then tighten all bolts and studs in the order shown.
Tightening Torque 20 - 30 Nm (2.1 - 3.0 kgf.m, 15 - 22 ft. lbf)
scientia non olet · About LEMON Manuals