LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2008 >> B4000 V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Monitors, Trips, Drive Cycles and Readiness Codes >> Monitor Repair Verification Drive Cycles >> Comprehensive Component Monitor Repair Verification Drive Cycle
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Comprehensive Component Monitor Repair Verification Drive Cycle

COMPREHENSIVE COMPONENT MONITOR REPAIR VERIFICATION DRIVE CYCLE

1. Complete vehicle preparation.
2. For MIT, accelerate from 0 to 80 km/h (0 to 50 mph). Continue to step 3. For A/T, from a stop and in overdrive, moderately accelerate to 80 km/h (50 mph) and cruise for at least 15 seconds. Stop vehicle and repeat without overdrive to 64 km/h (40 mph) cruising for at least 30 seconds. While at 64 km/h (40 mph), activate overdrive and accelerate to 80 km/h (50 mph) and cruise for at least 15 seconds. Stop for at least 20 seconds and repeat step 2 five times.
3. From a stop, accelerate to 104 km/h (65 mph). Decelerate at closed throttle until 64 km/h (40 mph) (no brakes). Repeat this 3 times.
4. Verify no DTCs are retrieved with exception of P1000.
scientia non olet · About LEMON Manuals