LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2008 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Oscilloscope Patterns and Waveforms
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oscilloscope Patterns and Waveforms

Inspection Using An Oscilloscope (Reference)

Fan control module (No.1) signal




PCM terminals
- 1AE (+) - body ground (-)

Oscilloscope setting
- 5 V/DIV (Y), 20 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

HO2S (front) heater control signal




PCM terminals
- 2C (+) - body ground (-)

Oscilloscope setting
- 2 V/DIV (Y), 20 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

CMP sensor signal




PCM terminals
- 2S (+) - body ground (-)

Oscilloscope setting
- 2 V/DIV (Y), 100 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

CKP sensor signal




PCM terminals
- 2W (+) - body ground (-)

Oscilloscope setting
- 2 V/DIV (Y), 5 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

Wastegate control solenoid valve signal




PCM terminals
- 2AA (+) - body ground (-)

Oscilloscope setting
- 20 V/DIV (Y), 20 ms/DIV (X), DC range

Vehicle condition
- Ignition switch to the ON position

Purge control signal




PCM terminals
- 2AB (+) - body ground (-)

Oscilloscope setting
- 10 V/DIV (Y), 20 ms/DIV (X), DC range

Vehicle condition
- Engine speed is 2,000 rpm

OCV signal




PCM terminals
- 2AF (+) body ground (-)

Oscilloscope setting
- 2-5 V/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

Generator field coil control signal




PCM terminals
- 2A1 (+) - body ground (-)

Oscilloscope setting
- 0.5 V/DIV (Y), 2 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)

Generator output voltage signal




PCM terminals
- 2AJ (+) - body ground (-)

Oscilloscope setting
- 2 V/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

IGT1, IGT2, IGT3, IGT4 control signals




PCM terminals
- IGT1 (No.1): 2BA (+) - body ground (-)
- IGT2 (No.2): 2AW (+) - body ground (-)
- IGT3 (No.3): 2AX (+) - body ground (-)
- IGT4 (No.4): 2AT (+) - body ground (-)

Oscilloscope setting
- 2 V/DIV (Y), 20 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

Fuel injection control (-)




PCM terminals
- Fuel injection No.1: 2BB (+) - body ground (-)
- Fuel injection No.2: 2BC (+) - body ground (-)
- Fuel injection No.3: 2BD (+) - body ground (-)
- Fuel injection No.4: 2AZ (+) - body ground (-)

Oscilloscope setting
- 10 V/DIV (Y), 20 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)

Fuel injection control (+)




PCM terminals
- Fuel injection No.1, No.4: 2BG (+) - body ground (-)
- Fuel injection No.2, No.3: 2BH (+) - body ground (-)

Oscilloscope setting
- 20 V/DIV (Y), 400 micro seconds/DIV (X), DC range

Vehicle condition
- Idle after warm up (no load, P/S off, A/C off)
scientia non olet · About LEMON Manuals