Antenna - Keyless Entry: Service and Repair
KEYLESS ANTENNA REMOVAL/INSTALLATIONDriver-side/passenger-side Door
1. Disconnect the negative battery cable.
2. Remove the door trim.
3. Remove the screws.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
Exterior, Rear
1. Disconnect the negative battery cable.
2. Remove the rear bumper.
3. Remove the nuts.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
Interior, Front
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Disconnect the connector, then remove the screws.
4. Remove the keyless antenna.
5. Install in the reverse order of removal.
Interior, Middle
1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the clips.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
Interior, Rear
1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the fastener.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
Interior, trunk
1. Disconnect the negative battery cable.
2. Remove the trunk end trim.
3. Remove the nuts.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.