October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Barometric Pressure Sensor: Service and Repair

BAROMETRIC PRESSURE (BARO) SENSOR REMOVAL/INSTALLATION
1. Disconnect the BARO sensor connector.

2. Remove the BARO sensor installation bolt and remove the BARO sensor.
3. Install in the reverse order of removal.

BARO sensor tightening torque
7.8 - 10.8 N.m {80 - 110 kgf.cm, 69 - 95 in.lbf}