October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [G35M-R] .)
Verify that the continuity between neutral switch terminals A and B is as indicated in the table.
- If there is no malfunction, perform the "Circuit Open/Short Inspection".
- If there is any malfunction, replace the neutral switch.
  
  Fig 1: Inspecting Neutral Switch
  Courtesy of MAZDA MOTORS CORP.

MEASURED CONDITION AND CONTINUITY REFERENCE

Measured condition	Transmission	Continuity
Rod pushed	In neutral	Continuity detected
Except above	Other	No continuity