LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 5 Touring, 2.3 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Crankshaft Position (CKP) Sensor Removal/Installation [L3] >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position (CKP) Sensor Removal/Installation [L3]: Removal

  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Perform the following procedure for easier access.
    1. Remove the under cover.
    2. Remove the splash shield.
  4. Disconnect the CKP sensor connector.
  5. Remove the CKP sensor.
    Fig 1: View Of Crankshaft Position Sensor
    G05543239Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals