LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Security System And Locks System) >> Keyless Receiver Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Receiver Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  4. Disconnect the keyless receiver connector.
  5. Remove the nut, then remove the keyless receiver.
    Fig 1: Identifying Keyless Receiver Remove / Install Components
    G05543500Courtesy of MAZDA MOTORS CORP.
  6. Push the stopper in with a small screwdriver and remove the bracket.
  7. Install in the reverse order of removal.
    Fig 2: Identifying Stopper
    G05543501Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals