Selector Lever Component Inspection

Disconnect the selector lever component connector.
1. Disconnect the negative battery cable.
2. Remove the rear console. See REAR CONSOLE REMOVAL/INSTALLATION .
3. Disconnect the selector lever component connector.
  
  Fig 1: Identifying Selector Lever Component Connector
  Courtesy of MAZDA MOTORS CORP.
Verify that the continuity is as indicated in the table
- If there is any malfunction, replace the selector lever component. See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .
  
  Fig 2: Identifying Selector Lever Component Connector Terminals
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 3: Terminals Continuity Chart
  Courtesy of MAZDA MOTORS CORP.