October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Switch Inspection

Remove the ignition switch. See IGNITION SWITCH .

Inspect for continuity between the ignition switch terminals using an ohmmeter.

Fig 1: Inspecting Ignition Switch

G04310564

Courtesy of MAZDA MOTORS CORP.

Inspection

INSPECTION CHART

Circuit to test	Connect self-powered test light or ohmmeter to terminals	Move switch to these positions	A good switch will indicate
Run power circuit	B1 and A1 B2 and A2 B4 and A4	Off/lock	Open circuit
		Accessory	Open circuit
		Run	Closed circuit
		Start	Open circuit
Run/start power circuit	B5 and 11	Off/lock	Open circuit
		Accessory	Open circuit
		Run	Closed circuit
		Start	Closed circuit
Ace power circuit	B5 and A1	Off/lock	Open circuit
		Accessory	Closed circuit
		Run	Open circuit
		Start	Open circuit
Start power circuit	B4 and STA	Off/lock	Open circuit
		Accessory	Open circuit
		Run	Open circuit
		Start	Closed circuit

If not as specified, replace the ignition switch.