LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> CX-9 Touring, 3.7 A, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC HU/Cm Removal/Installation >> Brake Pipe Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC/RSC HU/CM.
  2. Apply protective tape to the DSC/RSC HU/CM connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
    Fig 1: Identifying Alignment Mark On Brake Pipe & DSC/RSC HU/CM
    G04970209Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals