LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System >> Position Memory Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Position Memory Control Module Removal/Installation

  1. Operate the power seat switch and move the seat cushion forward and upward.
  2. Turn the ignition switch to the LOCK position.
  3. Disconnect the negative battery cable and wait 1 min or more. 
  4. Remove the driver-side front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  5. Remove the connector.
    Fig 1: Identifying Position Memory Control Module Components
    G05985942Courtesy of MAZDA MOTORS CORP.
  6. Remove the screw.
  7. Remove the position memory control module.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals