LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/CM Connector Removal Note

  1. Pull the lock lever up in the direction of the arrow.
  2. Pull the connector toward the vehicle rear and remove it.
Fig 1: View Of Pulling Lock Lever Up
G05985203Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals