Tire Pressure Monitoring System (TPMS) Sensor Activation

TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR ACTIVATION

NOTE:The tire pressure sensors will go into a "sleep mode" after 30 minutes of inactivity to conserve battery power. The sensors do not transmit information while in sleep mode. It will be necessary to wake them up so they will transmit the latest tire pressure information.
1. Turn the ignition switch to the ON position.

2. Position the activation tool against the LF tire sidewall at the tire valve stem.

3. Press the test button on the activation tool to activate the sensor, activate the sensor at least 2 times.

NOTE:The activation tool will provide feedback in the form of a flashing green light and a beep sound for each successful response from a tire pressure sensor.
4. Repeat Steps 2 and 3 for the remaining tires.

5. If the tire pressure monitoring system (TPMS) indicator remains illuminated after adjusting and activating each sensor, see - Tire Pressure Monitoring System (TPMS) - DTC Chart.