LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 3 L4-2.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Overhaul Procedures G66M-R >> Secondary Shaft Components Assembly >> 1ST Gear, 1ST Synchronizer Ring, and 1ST/2ND Clutch Hub Component Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

1ST Gear, 1ST Synchronizer Ring, and 1ST/2ND Clutch Hub Component Assembly Note

1st Gear, 1st Synchronizer Ring, and 1st/2nd Clutch Hub Component Assembly Note





1. Assemble the 1st gear, inner cone, double cone, 1st synchronizer ring, and 1st/2nd clutch hub component, as shown in the figure.





2. Press the 1st/2nd clutch hub component on using the SST.
scientia non olet · About LEMON Manuals