Security Access Procedure

NOTE:

Security access must be performed when performing the following functions: "Program Additional ignition key", "Ignition Key Code Erase and Program", "Customer Spare Key Programming Enable/Disable" and "Parameter Reset".

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
  1. Select the "Body".
  2. Select the "Security".
  3. Select the "PATS Functions".
- When using the PDS (Pocket PC)
  1. Select the "Programming".
  2. Select the "PATS Functions".
Then, select items from the screen menu in the following order.
- Program additional ignition key
- Ignition Key Code Erase and Program
- Customer Spare Key Programming Enable
- Customer Spare Key Programming Disable
- Parameter Reset
  
  Fig 1: Identifying DLC-2 Connector
  Courtesy of MAZDA MOTORS CORP.
The security access begins and the M-MDS displays the "OUT-CODE".
NOTE:
- When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".
Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.
If the security access is successful, selected item can be performed.