LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/CM Removal Note

  1. Move the DSC HU/CM component towards the inner side of the vehicle.
  2. Loosen the bolt as shown in the illustration.
  3. Move the DSC HU/CM as shown in the illustration.
  4. Remove the DSC HU/CM from the DSC HU/CM Bracket.
    Fig 1: Identifying DSC HU/CM Removal/Installation
    G06205582Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals