Fender Splash Shield Removal/Installation

FENDER SPLASH SHIELD REMOVAL/INSTALLATION





1. Remove the 3 fender splash shield bolts.

- To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.






2. Remove the 7 fender splash shield pin-type retainers.

3. Remove the 6 fender splash shield screws.

- To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.

4. Remove the fender splash shield.

5. To install, reverse the removal procedure.